IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 27 / 402

– Microsoft Windows NT Server Utility
– Novell NetWare/Intranetware Server Utility
– SCO OpenServer Utility
You can obtain updates to the installation instructions for
the ServeRAID utility programs from the World Wide Web.
See “Online support” on page iv.
Before you begin
Ÿ
Be sure that the ServeRAID controller is configured
properly.
Ÿ
Be sure that the network operating system is installed
and functional.
Ÿ
If you are using Microsoft Windows NT, you can use
the Administration and Monitoring utility program in
the client/server mode (across the network) or in the
stand-alone mode (at the server).
– See “Installing the Server Utility Programs” on
page 20 for client/server mode instructions.
– See “Installing the Administration and Monitoring
Utility Programs using diskettes” on page 25 for
stand-alone mode instructions.
Ÿ
If you are using OS/2, NetWare/IntraNetware, or SCO
OpenServer, you must use the Administration and
Monitoring utility program in the client/server mode.
Requirements for this environment include:
– A Windows NT or Windows 95 client running the
IBM ServeRAID Administration and Monitoring
utility program
– A network adapter or controller with proper
cabling for access to the client system
– The TCP/IP networking protocol installed on both
the server and client systems
– The IBM ServeRAID Administration and
Monitoring Server utility program installed on the
client system
- See “Installing the Server Utility Programs
using Diskettes” on page 20 to install the
server utility program.
- See “Installing the Administration and
Monitoring Utility Programs using diskettes”
on page 25 to install the Administration and
Monitoring utility program on a Windows 95
or Windows NT system.
Netfinity 5500 - Type 8660
19