IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 34 / 402

Note
You must first make the ServeRAID diskettes using
the Diskette Factory feature of ServerGuide. Refer to
the ServerGuide package for instructions. Also, if you
are using OS/2, Novell NetWare/IntraNetware, or SCO
OpenServer, you must use the Administration and
Monitoring utility program in the client/server mode.
To install the Administration and Monitoring utility
program using diskettes:
1. Ensure that the system is turned on and Windows NT
or Windows 95 is installed. Refer to the
documentation that comes with the operating system
for installation instructions.
2. Insert the Administration and Monitoring Utility
Program Diskette that you created into the diskette
drive.
3. At the Run prompt, type:
a:setup
4. Press Enter; then, follow the instructions that appear
on the screen.
For instructions on how to use the Administration and
Monitoring utility program, see “Using the Administration
and Monitoring Utility Program.”
Using the Administration and Monitoring
Utility Program:
You can use the Administration and
Monitoring utility program to monitor the serverAID
controllers, view the ServeRAID configuration and
associated devices, rebuild an array, reassign a drive to
replace a defunct drive, rebuild a logical drive, create a
logical drive, create an array, delete an array, dynamically
increase the logical drive size, change RAID levels, and
much more.
To start the Administration and Monitoring utility
program:
Ÿ
Double-click on the IBM ServeRAID Administration
icon.
or
Ÿ
Select IBM ServeRAID Administration from the start
menu.
The Administration and Monitoring utility program
starts in stand-alone mode.
26
Netfinity Server HMM