IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 75 / 402

management processor. You can use one of two
username and password combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password is case
sensitive. You must use all caps, and the
“0” in PASSW0RD is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
If you update the system management processor
microcode, the default username (USERID) and
password (PASSW0RD) are reset. If applicable,
notify the system administrator.
When you have logged into the system management
processor, the following main menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
To access a menu item, press the number or letter that
corresponds to the information you want to access. After
you select a menu item, subsequent menus will offer more
specific information that pertains to the selection you made
from the main menu.
Note
Ÿ
Selecting Y Disconnect Current Logon ends
the current session and requires you to enter a
new username and password before continuing.
Ÿ
Selecting Read displays the last entry.
Ÿ
Selecting Read Last steps backwards through
the entries.
Ÿ
Selecting Write executes the command.
Menu Selection Data Available for Viewing
Monitors System board temperature, CPU
temperatures, power supply
temperatures, voltage readings,
voltage regulator module readings, fan
status, redundant power supply status
Error Logs Contents of system error log
Netfinity 5500 - Type 8660
67