IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 267 / 402

System board removal
Notes
1. Read “Safety information” on page 308.
2. If possible, record the configuration settings
before removing the system board. (see
“Configuration/Setup Utility program” on
page 60.)
To remove the system board, do the following:
1. Remove the top cover (see “Top cover removal” on
page 262).
2. Disconnect all adapter cables and remove the
adapters (see “Adapters” on page 142).
3. Remove the adapter dividers.
a. Press on the adapter divider release tab
.1/
and
lift the divider out of the system.
b. Repeat the procedure for each adapter divider.
4. Remove the processor board (see “Processor board
removal” on page 232).
5. Disconnect all system board cables.
6. Remove the processor card support tray housing.
Netfinity 5500 - Type 8660
259