IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 226 / 402

Note
The illustration shows only the processor board for
simplicity; you do not need to remove the processor
board to install a microprocessor kit.
.1/
Voltage regulator module (VRM) for secondary
microprocessor
.2/
VRM for primary microprocessor
.3/
Primary microprocessor (CPU or processor 1)
.4/
Secondary microprocessor connector
.5/
Terminator card
.6/
Secondary microprocessor (CPU or processor 2)
.7/
Latches
.8/
Connector for VRM for secondary
microprocessor
To install an additional microprocessor kit:
1. Turn off the server and peripheral devices and
disconnect all external cables and power cords (see
“Preparing to install options” on page 220); then
remove the top cover (see “Top cover removal” on
page 262).
2. Remove the terminator card
.5/
from the secondary
microprocessor connector
.4/
. You do not need the
terminator card when you have a second
microprocessor installed. You can store it in a safe
place in the static-protective package that the new
microprocessor is shipped in.
3. Install the microprocessor:
a. Touch the static-protective package containing
the new microprocessor to any unpainted metal
surface on the server; then, remove the
microprocessor from the package.
218
Netfinity Server HMM