IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 28 / 402

Installing the Server Utility Programs
Note
If you are installing the OS/2, Novell
NetWare/Intranetware, or SCO OpenServer versions
of the server utility programs, you must use diskettes.
Go to
You can install the server utility programs in one of two
ways:
Ÿ
Using ServerGuide (see “Installing the Server Utility
Programs using ServerGuide”)
Ÿ
Using diskettes (see “Installing the Server Utility
Programs using Diskettes”)
Installing the Server Utility Programs using
ServerGuide:
You can install the server utility programs
using the CoPilot feature of ServerGuide. Refer to the
ServerGuide package for more information.
Once you have installed the server utility programs, go to
“Using the Server Utility Programs” on page 23 for
information on how to use them.
Installing the Server Utility Programs using
Diskettes:
This section contains installation instructions
and information about using the IBM OS/2 server utility,
Microsoft Windows NT server utility, Novell
NetWare/IntraNetware server utility, and SCO OpenServer
utility.
Note
You must first make the ServeRAID diskettes using
the Diskette Factory feature of ServerGuide. Refer to
the ServerGuide package for instructions.
IBM OS/2 Server Utility Programs:
To install the
IBM OS/2 server utility program using diskettes:
1. Insert the IBM ServeRAID Device Driver Diskette into
the diskette drive.
2. Create an IPSRAID directory on the hard disk. Type:
md d:\ipsraid
(where
d: is the hard disk drive letter)
3. Copy the following file to the target directory. Type:
copy a:\remote\servers\os2\ipsadm.exe d:\ipsraid
(where a: is the diskette drive letter and d: is the hard
disk drive letter)
4. Copy the icon file to the target directory. Type:
copy a:\remote\servers\os2\ipsadm.ico
d:\ipsraid\ipsadm.ico
20
Netfinity Server HMM