IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 263 / 402

System board component locations
The following illustration shows the system board and
identifies system board components. You might need to
refer to this figure before you install hardware in the
server, or when you record information in the tables in this
chapter. You might also need to refer to this figure when
you set configuration jumpers on the system board.
33
34
37
32
35
38
31
36
39
40
41
42
43 44 46 45
.1/
Processor board connector (J19)
.2/
System management processor error LED
(CR24)
.3/
RAID channel 1 connector (J7)
.4/
RAID channel 1 error LED (CR30)
.5/
RAID channel 2 error LED (CR31)
.6/
Reserved (J54)
.7/
Reserved (J64)
.8/
Disable RAID controller jumper block (J11)
.9/
Reserved (J45)
.1ð/
Power on control jumper block (J32)
.11/
Reserved (J25)
.12/
Reserved (J9)
.13/
Power backplane cable connector (J8)
.14/
RAID channel 2 connector (to backplane) (J3)
.15/
RAID system error LED (CR32)
.16/
Reserved (J27)
.17/
Reserved (J35)
.18/
SCSI activity LED connector (J52)
.19/
Reserved (J34)
.2ð/
Reserved (J29)
.21/
Reserved (J26)
Netfinity 5500 - Type 8660
255