IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 391 / 402

20. Place the IBM Netfinity 5500 M20 system service
label on the inside of the top cover.
21. Place one upgrade sticker near the machine type
serial number on the information label. The upgrade
sticker identifies the server as having this option
installed.
Note
The information label is located at the front of the
server behind the media-bay trim bezel.
22. Place the other upgrade sticker on the front bezel,
above the machine type serial number.
23. Place the Intel microprocessor label on the front
bezel.
24. Reinstall the top cover.
a. Check that all cables, adapters, and other
components are installed and seated correctly
and that you have not left loose tools or parts
inside the server.
b. Lower the cover with the rear edge of the cover
approximately 2.5 cm (1 in.) back from the rear
edge of the server.
c. Slide the cover forward.
d. Tighten the two thumbscrews on the back edge
of the cover.
25. Go to “Completing the upgrade installation” on
page 384.
4-way Xeon upgrade installation
383