IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 169 / 402

CD-ROM drive
An IDE CD-ROM drive is a standard feature on the server.
CD-ROM drives can play back or read from a CD, but
cannot write information to it. CD-ROM drives use industry
standard, 12 cm (4.75-inch) CDs.
Follow these guidelines when using a CD-ROM drive:
Ÿ
Do not place the server where the following
conditions exist:
–
High temperature
– High humidity
– Excessive dust
– Excessive vibration or sudden shock
– An inclined surface
– Direct sunlight
Ÿ
Do not insert any object other than a CD into the
drive.
Ÿ
Before moving the server, remove the CD from the
drive.
The following illustration shows the front of the CD-ROM
drive.
CD-ROM Drive
In-Use Light
Emergency-Eject
Hole
Eject/Load
Button
Handling a CD:
When handling a CD, follow these
guidelines:
Ÿ
Hold the CD by its edges. Do not touch the surface.
Ÿ
To remove dust or fingerprints, wipe the CD from the
center to the outside with a soft, nonabrasive cloth.
Wiping the CD in a circular direction might cause loss
of data.
Ÿ
Do not write or stick paper on the CD.
Ÿ
Do not scratch or mark the CD.
Ÿ
Do not place or store the CD in direct sunlight.
Ÿ
Do not use benzene, thinners, or other cleaners to
clean the CD.
Ÿ
Do not drop or bend the CD.
Loading a CD:
To load a CD into a CD-ROM drive:
1. Press the Eject/Load button. The tray slides out of
the drive. (Do not manually force the tray open.)
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or
Netfinity 5500 - Type 8660
161