IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 38 / 402

Ÿ
Synchronization started
Ÿ
Synchronization completed
Ÿ
Migration started
Ÿ
Migration completed
Ÿ
PFA event detected
Ÿ
Dead drive detected
Ÿ
ServeRAID controller not responding to commands
Netfinity alert options:
Netfinity alerts allow system
administrators who are using the Netfinity Manager to
configure the ServeRAID Administration and Monitoring
utility program, to notify the Netfinity Alert Manager of
various activities occurring on the server.
To configure the settings for the Netfinity alerts:
1. Open the Options pull-down menu.
2. Click on Alert Options.
3. Click on Netfinity Alerts.
A screen similar to the following appears.
Enable Netfinity Alerts
Netfinity Alerts
Alert Information Messages
Alert Warning Messages
Alert Fatal Messages
Send Test Alert Cancel OK
4. To enable all of the Netfinity alerts, click on the check
box next to Enable Netfinity Alerts.
5. To disable any of the Netfinity alerts:
a. Verify that there is a check in the check box next
to Enable Netfinity Alerts.
b. Click on the check box next to the specific alert
or alerts that you want to disable.
6. To test the Netfinity alerts, click on the Send Test
Alert button. This will send a Netfinity alert and test
message to the Netfinity Alert Manager.
If Netfinity alerts are enabled, the ServeRAID controller
relays three types of messages to the Netfinity Alert
Manager:
Ÿ
Information messages
–
Rebuild started
– Rebuild completed
– Synchronization started
30
Netfinity Server HMM