IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 78 / 402

To access these functions:
1. Use a terminal program to establish a connection with
the system management processor modem.
2. Log in to the system management processor.
When you have established a connection with the
system management processor, you will be prompted
for a username and password. You must provide a
username and password combination that has been
previously configured for use with the system
management processor. You can use one of two
username and password combinations:
Ÿ
The default username (USERID) and password
(PASSW0RD)
Note
The default username and password is case
sensitive. You must use all caps, and the
“0” in PASSW0RD, is the numeral zero.
Ÿ
A username and password that you define using
the Advanced System Management service and
Netfinity Manager
Important
If you update the system management processor
microcode, the default username (USERID) and
password (PASSW0RD) are reset. If applicable,
notify the system administrator.
When you have logged into the system management
processor, the following main menu appears:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Select 7 Boot.
The following Boot menu appears:
1 Reboot w/OS Shutdown
2 Reboot immediately
3 Restart SP
4. Select a Boot menu item.
Ÿ
Select 1 Reboot w/OS Shutdown to shutdown
the server operating system and then restart the
server.
Ÿ
Select 2 Reboot immediately to restart the
server immediately, without first shutting down
the operating system.
70
Netfinity Server HMM