IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 278 / 402

Diagnostic error codes
Attention
In the following error codes, if XXX is 000, 195, or 197
do not replace a FRU. The description for these error
codes are:
000 The test passed.
195 The Esc key was pressed to abort the
test.
197 This is a warning error and may not
indicate a hardware failure.
For all error codes, replace/follow the FRU/Action
indicated.
Error Code/Symptom FRU/Action
001-XXX-000
(Failed core tests) 1. System Board
001-XXX-001
(Failed core tests) 1. Processor Board
001-250-000
(Failed System Board ECC) 1. System Board
001-250-001
(Failed Processor Board
ECC) 1. Processor Board
2. System Board
005-XXX-000
(Failed Video test) 1. System Board
2. Processor Board
011-XXX-000
(Failed COM1 Serial Port
test)
Note: The external loopback
test of Serial Port A will fail
if run remotely. 1. System Board
011-XXX-001
(Failed COM2 Serial Port
test) 1. System Board
014-XXX-000
(Failed Parallel Port test) 1. System Board
015-XXX-001
(Failed USB test) 1. System Board
020-XXX-000
(Failed PCI Interface test) 1. Processor Board
2. System Board
020-XXX-001 (Failed
Hot-Swap Slot 1 PCI Latch
test) 1. PCI Hot-Swap Latch
Assembly
2. System Board
020-XXX-002
(Failed Hot-Swap Slot 2 PCI
Latch test) 1. PCI Hot-Swap Latch
Assembly
2. System Board
020-XXX-003
(Failed Hot-Swap Slot 3 PCI
Latch test) 1. PCI Hot-Swap Latch
Assembly
2. System Board
270
Netfinity Server HMM