IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 125 / 402

2. Select Rebuild/Device Management from the Main
Menu; then, press Enter.
3. Select Set Device State from the next menu; then,
press Enter.
4. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to
highlight the appropriate drive; then, press Enter.
A screen similar to the following appears.
Bay
Array
Bay
Array
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Ch 1 Ch 2
INI
RDY
CDR
B
B
HSP
ONL
ONL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
INI
Select the state to change the drive to and press Enter. Please wait.
IBM ServeRAID Adapter Disk Array Configuration Ver. X.XX
Adapter Number: 1 Bus Number: 0 Host ID = Null Config
A
A
ONL
ONL
A
ONL
1. Help
2. Set Device State
3. Rebuild Drive
4. Display Drive Information
5. Erase Device Event Log
6. Exit
1. EMP
2. SBY
3. DHS
4. SHS
5. DDD
6. RDY
7. HSP
8, ONL
9. RBL
Rebuild/Device Management
Device States
The Drive States pop-up window lists all hard disk
drive states. (See “Physical device states” on
page 86 for more information.) The following table
shows the current device states and the valid
alternate device states that you can assign. For
example, you can change the state of a standby
hot-spare drive from SHS to HSP or DHS.
Note
Setting a DDD drive that is part of a CRT logical
drive to ONL without performing the rebuild
process might result in loss of data. (See
“Understanding the drive rebuild process” on
page 131 for more information.)
Device States Alternate States
EMP RDY SBY
SBY RDY EMP HSP SHS
DHS EMP HSP SHS
SHS HSP DHS
DDD ONL RBL
RDY EMP HSP SHS SBY
HSP RDY SHS DHS
ONL DDD
RBL DDD ONL
5. Use the Up Arrow (
↑
) or Down Arrow (
↓
) key to
highlight a valid alternate drive state; then, press
Enter. The new state appears in the Array/Bay
selection list.
6. If you want to change the state of another drive,
return to step 4. Otherwise, continue with step 7.
7. Press Esc to return to the Main Menu.
Netfinity 5500 - Type 8660
117