IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 392 / 402

Completing the upgrade installation
Information on the following pages will guide you in
completing the hardware installation and installing the
necessary software for this processor upgrade.
Updating the system configuration
Complete this procedure.
1. Connect the power cord to the power supply.
2. Connect all other server and device cables and
connectors.
3. Turn the server power on.
4. Watch the monitor screen. The system automatically
accesses the Configuration/Setup program.
5. Select Save Settings and exit the
Configuration/Setup program.
6. Insert the
HardwareGuide CD that comes with the
IBM Netfinity 5500 M20 Server Library contained in
this option package, into the CD-ROM drive. If
necessary, refer to the Server Library for information
on using the
HardwareGuide CD.
7. Restart the server.
8. Go to “Updating the System Diagnostic programs.”
Updating the System Diagnostic
programs
Complete this procedure to update the system diagnostic
programs.
1. Insert the IBM Netfinity 5500 M20 Diagnostic Update
Diskette 1 of 2 into the diskette drive.
2. Press Ctrl
+
Alt
+
Del to restart the server. The system
begins the power-on self-test (POST).
Information similar to the following will appear on the
screen.
à ð
Flash Utility
Select one:
1. Update Diagnostics
3. Exit
Enter F1=Help F3=Exit
á ñ
3. Select: 1. Update Diagnostics and press Enter.
4. Select a language (0–7) from the list shown on the
next screen and press Enter to accept your choice.
A message in your selected language similar to the
following appears.
384
Netfinity Server HMM