IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 86 / 402

page iv for information about pages IBM maintains on the
World Wide Web.
Once you have made the ServeRAID diskettes, do the
following to start the ServeRAID Configuration program.
Insert the ServeRAID Configuration Diskette into the
primary diskette drive; then, turn on the system. If the
system is already turned on, press Ctrl
+
Alt
+
Del.
Each time the system starts, the ServeRAID controller
performs a power-on self-test (POST). The POST checks
the configuration information for the ServeRAID controller
and for the configured hard disk drives. When POST
detects a problem, an error message appears on the
screen. If this occurs, see “Symptom-to-FRU index” on
page 264.
When the ServeRAID Configuration program starts, go to
“Using the ServeRAID Configuration program” on
page 101 for more information.
78
Netfinity Server HMM