IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 353 / 402

à ð
Reading the flash image $ðð21ððð.us1
á ñ
After this message appears, you will be prompted to
insert the
IBM Netfinity Diagnostic Update Diskette 2
of 2 into the diskette drive.
5. Insert the diskette into the diskette drive and press
Enter.
A message similar to the following appears.
à ð
Reading the flash image $ðð21ððð.us2
á ñ
After this message, another message similar to the
following appears.
à ð
The system diagnostic is being updated and it might
take up to 5 minutes to complete.
Do not power off
or restart the system during this procedure.
á ñ
6. When the update is complete, a message similar to
the following appears, however, do not press enter to
restart the system at this time.
à ð
Diagnostic Update Completed.
Remove the diskette from the drive and press
Enter to restart the system.
á ñ
Remove the diskette from the diskette drive and turn
off the server. This completes the update of the
software needed to install the Processor Upgrade Kit.
You will now install the hardware.
2-way Xeon upgrade installation
345