IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 355 / 402

Installing the hardware
The information on the following pages will guide you in
installing the hardware included in this processor upgrade.
Removing the processor assembly
Complete this procedure to remove the processor
assembly.
1. Remove all media (diskettes, CDs, optical discs, or
tapes) from the drives.
2. Turn off the server and any attached devices.
3. If you are in the United Kingdom and have a modem
or fax machine attached to the server, you must
disconnect the telephone line from the server
before
unplugging any power cords (also known as power
cables). When reassembling the server, you must
reconnect the telephone line
after you plug in the
power cords.
4. Disconnect all power cords (cables) from electrical
outlets.
5. Disconnect all power cords from the server.
6. Disconnect all communication cables from external
receptacles.
7. Note the location of the remaining cables and cords;
then, disconnect them from the server.
8. Unscrew the top cover thumbscrews
.1/
and remove
the top cover
.2/
.
9. Loosen the four thumbscrews
.1/
at the rear of the
shuttle.
2-way Xeon upgrade installation
347