IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 166 / 402

Controls and indicators
The most commonly used controls and indicators on the
front of the server appear in the following illustration.
Door Lock
(On Side Cover)
Hard Disk
Status Light
Hard Disk
Activity Light
CD-ROM
Eject/Load
Button
Diskette Drive
Eject Button
CD-ROM
In-Use Light
Diskette Drive
In-Use Light
Information
LED Panel
Power Control
Button
Reset Button
Door Lock (Tower Model Only): You can lock the
door on the server to deter tampering with the internal
components. This same lock also locks the top cover
in place.
Power Control Button: Press this button to
manually turn the server on or off.
Caution
The Power Control button on the front of the
server does not turn off the electrical current
supplied to the server. The server also might
have more than one power cord. To remove all
electrical current from the server, ensure that all
power cords are disconnected from the power
source.
The server can be activated in several ways:
Ÿ
You can turn the server on by pressing the
Power Control button on the front of the server.
Note
If you have just plugged the power cord of
the server into an electrical outlet, you will
have to wait approximately 20 seconds
before pressing the Power Control button.
Ÿ
If the server is activated and a power failure
occurs, the server will start automatically.
158
Netfinity Server HMM