IBM 866011U - Netfinity 5500 - 8660, Hardware Maintenance Manual

Page: 100 / 402

System summary:
Select this choice to display
configuration information, including the type and speed of
the microprocessor and amount of memory.
Changes that you make to configuration settings appear on
this summary screen. You cannot edit the fields.
The System Summary choice appears on the full
Configuration/Setup Utility menu and on the limited
Configuration/Setup Utility menu.
System information:
Select this choice to display
information about the Netfinity 5500, and to view the IRQ
settings for the RAID and Ethernet controllers on the
system board, and other PCI adapters that you purchase
and install.
Changes that you make on other menus might appear on
this summary screen. You cannot edit any fields.
The System Information choice appears only on the full
Configuration/Setup Utility menu.
Product data:
Select this choice to view system
information, such as the machine type and model, the
system serial number, the system board identifier, and the
revision level or issue date of the flash electronically
erasable programmable ROM (EEPROM) for the system
management processor, diagnostics, and BIOS.
System card data:
Select this choice to view
information for the system board and processor board.
PCI routing:
Select this choice to view the IRQ settings
for PCI adapters and for the Ethernet, SCSI, and other
controllers on the system board. See “PCI bus control” on
page 98 for information about changing the PCI IRQ
settings.
Devices and I/O ports:
Software recognizes ports
through their port assignments. Each port must have a
unique port assignment. The Configuration/Setup Utility
program normally handles this, but you might have special
hardware or software that requires you to change these
assignments.
Note
Serial port A can be shared by the system
management processor and operating system. Serial
port B is used by the operating system only.
Management port C is controlled exclusively by the
system management processor, cannot be used by
the operating system, and cannot be configured using
the Configuration/Setup utility program.
92
Netfinity Server HMM