Enterasys G3G170-24, Cli Reference Manual

Page: 78 / 679

set port inlinepower
2-34 Basic Configuration
Mode
Switch command, read ‐ only.
Example
This example shows how to display PoE information for port ge.2.1 . In this case, the port’s
administrative state, PoE priority and class have not been changed from default values:
G3(su)->show port inlinepower ge.2.1
Port Type
Admin Oper Priority Class Power(W)
---- ---- ----- ---- -------- ----- --------
ge.2.1 wireless auto searching low 0 15.4
set port inlinepower
Use this command to configure PoE parameters on one or more ports.
Syntax
set port inlinepower port-string {[ admin { off | auto }] [ priority { critical | high
| low }] [ type type ]}
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable PoE on port
ge
.3.1 with critical priority:
G3(su)->set port inlinepower ge.3.1 admin auto priority critical
port ‐ string Specifies the port(s) on which to configure PoE.
admin off | auto Sets the PoE administrative state to off (disabled) or auto (on).
priority critical |
high | low
Sets the port(s) priority for the PoE allocation algorithm to critical
(highest), high or low.
type type Specifies a string describing the type of device connected to a port.