Enterasys G3G170-24, Cli Reference Manual

Page: 629 / 679

set macauthentication portreauthenticate
Enterasys G-Series CLI Reference 20-27
set macauthentication portreauthenticate
Use this command to force an immediate reauthentication of the currently active sessions on one
or more MAC authentication ports.
Syntax
set macauthentication portreauthenticate port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to force
ge
.2.1 though 5 to reauthenticate:
G3(su)->set macauthentication portreauthentication ge.2.1-5
set macauthentication macreauthenticate
Use this command to force an immediate reauthentication of a MAC address.
Syntax
set macauthentication macreauthenticate mac-addr
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to force the MAC authentication session for address 00 ‐ 60 ‐ 97 ‐ b5 ‐ 4c ‐ 07
to reauthenticate:
G3(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07
port ‐ string Specifies MAC authentication port(s) to be reauthenticated. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.
mac ‐ addr Specifies the MAC address of the session to reauthenticate.