Enterasys G3G170-24, Cli Reference Manual

Page: 310 / 679

clear policy port
8-14 Policy Classification Configuration
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to allow Gigabit Ethernet ports 5 through 15 in slot 1 to transmit frames
according to policy profile 1:
G3(su)->set policy port ge.1.5-15 1
clear policy port
Use this command to remove a policy profile from one or more ports.
Syntax
clear policy port port-string profile-index
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to remove policy profile 10 from port 21 in slot 1:
G3(rw)->clear policy port ge.1.21 10
port ‐ string Specifies the port(s) to add to the policy profile. For a detailed description
of possible port ‐ string values, refer to “ Port String Syntax Used in the CLI ”
on page 4 ‐ 1.
profile ‐ index Specifies the ID of the policy profile (role) to which the port(s) will be
added. This value must match the profile ‐ index value assigned using the
set policy profile command (“ set policy profile ” on page 8 ‐ 4) in order for
a policy profile to be active on the specified port.
port ‐ string Specifies the port(s) from which to remove the policy profile. For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 4 ‐ 1.
profile ‐ index Specifies the ID of the policy profile (role) to which the port(s) will be
added. This value must match the profile ‐ index value assigned using the
set policy profile command (“ set policy profile ” on page 8 ‐ 4) in order for
a policy profile to be active on the specified port.