Enterasys G3G170-24, Cli Reference Manual

Page: 373 / 679

clear mac address
Enterasys G-Series CLI Reference 11-23
Defaults
If no port ‐ string is defined, the command will apply to all ports.
Mode
Switch command, read ‐ write.
Example
This example configures multicast MAC address 01 ‐ 01 ‐ 22 ‐ 33 ‐ 44 ‐ 55 for VLAN 24.
G3(su)->set mac multicast 01-01-22-33-44-55 24
clear mac address
Use this command to remove a multicast MAC address.
Syntax
clear mac address mac-address [ vlan-id ]
Parameters
Defaults
If no vlan ‐ id is specified, the multicast MAC address is cleared from all VLANs.
Mode
Switch command, read ‐ write.
Example
This example clears multicast MAC address 01 ‐ 01 ‐ 22 ‐ 33 ‐ 44 ‐ 55 from VLAN 24.
G3(su)->clear mac multicast 01-01-22-33-44-55 24
show mac unreserved-flood
Use this command to display the state of multicast flood protection.
Syntax
show mac unreserved-flood
port ‐ string Specifies the port or range of ports the multicast MAC address can be
learned on or flooded to.
append | clear Appends or clears the port or range of ports from the egress port list.
mac ‐ address Specifies the multicast MAC address to be cleared. The MAC address
can be formatted as xx:xx:xx:xx:xx:xx or xx ‐ xx ‐ xx ‐ xx ‐ xx ‐ xx.
vlan ‐ id (Optional) Specifies the VLAN ID from which to clear the static
multicast MAC address.