Enterasys G3G170-24, Cli Reference Manual

Page: 145 / 679

set port jumbo
Enterasys G-Series CLI Reference 4-13
Defaults
If port ‐ string is not specified, jumbo frame support status for all ports will display.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the status of jumbo frame support for ge .1.1:
G3(su)->show port jumbo ge.1.1
Port Number Jumbo Status Max Frame Size
------------- --------------- ------------------
ge.1.1 Enable
9216
set port jumbo
Use this command to enable or disable jumbo frame support on one or more ports.
Syntax
set port jumbo { enable | disable }[ port-string]
Parameters
Defaults
If port ‐ string is not specified, jumbo frame support will be enabled or disabled on all ports.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable jumbo frame support for Gigabit Ethernet port 14 in slot 3:
G3(su)->set port jumbo enable ge.3.14
clear port jumbo
Use this command to reset jumbo frame support status to enabled on one or more ports.
Syntax
clear port jumbo [ port-string]
enable | disable Enables or disables jumbo frame support.
port ‐ string (Optional) Specifies the port(s) on which to disable or enable jumbo
frame support. For a detailed description of possible port ‐ string values,
refer to “ Port String Syntax Used in the CLI ” on page 4 ‐ 1.