Enterasys G3G170-24, Cli Reference Manual

Page: 649 / 679

show maclock
Enterasys G-Series CLI Reference 20-47
show maclock
Use this command to display the status of MAC locking on one or more ports.
Syntax
show maclock [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, MAC locking status will be displayed for all ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display MAC locking information for ge .1.1.
G3(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
------- ------- -------- ------- ---------- --------------- ---------------
ge.1.1 enabled disabled enabled 20 1 00:a0:c9:39:5c:b4
Table 20 ‐ 6 provides an explanation of the command output.
set maclock static 20-52
clear maclock static 20-52
set maclock firstarrival 20-53
clear maclock firstarrival 20-54
set maclock agefirstarrival 20-54
clear maclock agefirstarrival 20-55
set maclock move 20-55
set maclock trap 20-56
For information about... Refer to page...
port ‐ string (Optional) Displays MAC locking status for specified port(s). For a
detailed description of possible port ‐ string values, refer to “ Port String
Syntax Used in the CLI ” on page 4 ‐ 1.
Table 20-6 show maclock Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“ Port String Syntax Used in the CLI ” on page 4-1.