Enterasys G3G170-24, Cli Reference Manual

Page: 301 / 679

clear policy profile
Enterasys G-Series CLI Reference 8-5
clear policy profile
Use this command to delete a policy profile entry.
Syntax
clear policy profile profile-index
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to delete policy profile 8:
G3(su)->clear policy profile 8
Configuring Classification Rules
Purpose
To review, create, assign, and unassign classification rules to policy profiles. This maps user
profiles to protocol ‐ based frame filtering policies.
Commands
show policy rule
Use this command to display policy classification rule information.
profile ‐ index Specifies the index number of the profile entry to be deleted. Valid values
are 1 to 255 .
Note: B3, C3, and G3 devices support profile-based CoS traffic rate limiting only. Policy rules
specifying CoS will not rate limit on these devices, or on mixed stacks including B3 or C3 devices.
For information about... Refer to page...
show policy rule 8-5
show policy capability 8-8
set policy rule 8-10
clear policy rule 8-12
clear policy all-rules 8-13