Enterasys G3G170-24, Cli Reference Manual

Page: 158 / 679

set linkflap threshold
4-26 Port Configuration
Parameters
Defaults
If port ‐ string is not specified, actions will be cleared on all ports.
Mode
Switch mode, read ‐ write.
Example
This example shows how to clear the link flap violation action on port
ge
.1.4 to generating a
Syslog entry.
G3(rw)->clear linkflap action ge.1.4 gensyslogentry
set linkflap threshold
Use this command to set the link flap action trigger count.
Syntax
set linkflap threshold port-string threshold-value
Parameters
Defaults
None.
Mode
Switch mode, read ‐ write.
Example
This example shows how to set the link flap threshold on port ge .1.4 to 5.
G3(rw)->set linkflap threshold ge.1.4 5
set linkflap downtime
Use this command to set the time interval (in seconds) one or more ports will be held down after a
link flap violation.
port ‐ string (Optional) Specifies the port(s) on which to clear the link flap action.
disableInterface Clears the reaction as disabling the interface.
gensyslogentry Clears the reaction as generating a syslog entry.
gentrap Clears the reaction as generating an SNMP trap.
all Clears the reaction as all of the above.
port ‐ string Specifies the port(s) on which to set the link flap action trigger count.
threshold ‐ value Specifies the number of link down transitions necessary to trigger the
link flap action. A minimum of 1 must be configured.