Enterasys G3G170-24, Cli Reference Manual

Page: 639 / 679

show multiauth idle-timeout
Enterasys G-Series CLI Reference 20-37
Defaults
If no options are specified, multiple authentication session entries will be displayed for all
sessions, authentication types, MAC addresses, and ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display multiple authentication session information for port ge .1.1.
G3(su)->show multiauth session port ge.1.1
__________________________________________
Port | ge.1.1 Station address | 00-01-03-86-0A-87
Auth status
| success Last attempt | FRI MAY 18 11:16:36 2007
Agent type | dot1x Session applied | true
Server type | radius VLAN-Tunnel-Attr | none
Policy index | 0 Policy name | Administrator
Session timeout | 0 Session duration | 0,00:00:25
Idle timeout | 5 Idle time | 0,00:00:00
Termination time | Not Terminated
show multiauth idle-timeout
Use this command to display the timeout value, in seconds, for an idle session for all
authentication methods.
Syntax
show multiauth idle-timeout
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ only.
Example
This example shows how to display timeout values for an idle session for all authentication types.
G3(su)->show multiauth idle-timeout
Authentication type Timeout (sec)
------------------- -------------
dot1x 0
pwa 0
mac 0