Enterasys G3G170-24, Cli Reference Manual

Page: 232 / 679

set spantree msti
6-12 Spanning Tree Configuration
Syntax
show spantree mstilist
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ only.
Example
This example shows how to display a list of MST instances. In this case, SID 2 has been configured:
G3(su)->show spantree mstilist
Configured Multiple Spanning Tree instances:
2
set spantree msti
Use this command to create or delete a Multiple Spanning Tree instance.
Syntax
set spantree msti sid sid { create | delete}
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to create an MST instance 2:
G3(su)->set spantree msti sid 2 create
clear spantree msti
Use this command to delete one or more Multiple Spanning Tree instances.
sid sid Sets the Multiple Spanning Tree ID. Valid values are 1 ‐ 4094 .
G ‐ Series devices will support up to 4 MST instances.
create | delete Creates or deletes an MST instance.