Enterasys G3G170-24, Cli Reference Manual

Page: 138 / 679

show port counters
4-6 Port Configuration
Defaults
If port ‐ string is not specified, counter statistics will be displayed for all ports.
If mib2 or switch are not specified, all counter statistics will be displayed for the specified port(s).
Mode
Switch command, read ‐ only.
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and
traffic through the device for ge .3.1:
G3(su)->show port counters ge.3.1
Port: ge.3.1 MIB2 Interface: 1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
802.1Q Switch Counters
----------------------
Frames Received
0
Frames Transmitted 0
This example shows how to display all ge .3.1 port counter statistics related to traffic through the
device.
G3(su)->show port counters ge.3.1 switch
Port: ge.3.1 Bridge Port: 2
802.1Q Switch Counters
-----------------------
Frames Received 0
Frames Transmitted 0
Table 4 ‐ 2 provides an explanation of the command output.
switch | mib2 (Optional) Displays switch or MIB2 statistics. Switch statistics detail
performance of the G ‐ Series device. MIB2 interface statistics detail
performance of all network devices.