Enterasys G3G170-24, Cli Reference Manual

Page: 141 / 679

set port alias
Enterasys G-Series CLI Reference 4-9
Example
This example shows how to display alias information for ports 1 ‐ 3 on slot 3:
G3(rw)->show port alias ge.3.1-3
Port ge.3.1 user
Port ge.3.2 user
Port ge.3.3 Admin
set port alias
Use this command to assign an alias name to a port.
Syntax
set port alias port-string [ name ]
Parameters
Defaults
If name is not specified, the alias assigned to the port will be cleared.
Mode
Switch command, read ‐ write.
Examples
This example shows how to assign the alias “Admin” to
ge
.3.3:
G3(rw)->set port alias ge.3.3 Admin
This example shows how to clear the alias for ge .3.3:
G3(rw)->set port alias ge.3.3
Setting Speed and Duplex Mode
Purpose
To review and set the operational speed in Mbps and the default duplex mode: Half , for half
duplex, or Full , for full duplex for one or more ports.
port ‐ string Specifies the port to which an alias will be assigned. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 4 ‐ 1.
name (Optional) Assigns an alias name to the port. If the alias name contains
spaces, the text string must be surrounded by double quotes. Maximum
length is 60 characters.
Note: These settings only take effect on ports that have auto-negotiation disabled.