Enterasys G3G170-24, Cli Reference Manual

Page: 197 / 679

Configuring SNMP Access Rights
Enterasys G-Series CLI Reference 5-15
Configuring SNMP Access Rights
Purpose
To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.
Commands
show snmp access
Use this command to display access rights and security levels configured for SNMP one or more
groups.
Syntax
show snmp access [ groupname ] [security-model {v1 | v2c | usm}] [noauthentication
| authentication | privacy] [ context context ] [ volatile | nonvolatile | read-only ]
Parameters
Defaults
If groupname is not specified, access information for all SNMP groups will be displayed.
If security ‐ mode l is not specified, access information for all SNMP versions will be displayed.
If noauthentication , authentication or privacy are not specified, access information for all
security levels will be displayed.
If context is not specified, all contexts will be displayed.
If volatile , nonvolatile or read ‐ only are not specified, all entries of all storage types will be
displayed.
For information about... Refer to page...
show snmp access 5-15
set snmp access 5-16
clear snmp access 5-18
groupname (Optional) Displays access information for a specific SNMPv3 group.
security ‐ model v1 |
v2c | usm
(Optional) Displays access information for SNMP security model version
1, 2c or 3 (usm).
noauthentication |
authentication |
privacy
(Optional) Displays access information for a specific security level.
context context (Optional) Displays access information for a specific context. For a
description of how to specify SNMP contexts, refer to “ Using SNMP
Contexts to Access Specific MIBs ” on page 5 ‐ 3.
volatile |
nonvolatile | read ‐
only
(Optional) Displays access entries for a specific storage type.