Enterasys G3G170-24, Cli Reference Manual

Page: 286 / 679

clear vlan egress
7-14 802.1Q VLAN Configuration
Parameters
Defaults
If untagged, forbidden or tagged is not specified, the port will be added to the VLAN egress list
as tagged.
Mode
Switch command, read ‐ write.
Examples
This example shows how to add ge .1.5 through 10 to the egress list of VLAN 7. This means that
these ports will transmit VLAN 7 frames as tagged
:
G3(su)->set vlan egress 7 ge.1.5-10 untagged
This example shows how to forbid ports 13 through 15 in slot 1 from joining VLAN 7 and disallow
egress on those ports:
G3(su)->set vlan egress 7 ge.1.13-15 forbidden
This example shows how to allow port 2 in slot 1 to transmit VLAN 7 frames as untagged
:
G3(su)->set vlan egress 7 ge.1.2 untagged
clear vlan egress
Use this command to remove ports from a VLAN’s egress list.
Syntax
clear vlan egress vlan-list port-string [ forbidden ]
Parameters
vlan ‐ list
Specifies the VLAN where a port(s) will be added to the egress list.
port ‐ string Specifies one or more ports to add to the VLAN egress list of the specified
vlan ‐ list . For a detailed description of possible port ‐ string values, refer to
“ Port String Syntax Used in the CLI ” on page 4 ‐ 1.
untagged |
forbidden |
tagged
(Optional) Adds the specified ports as:
• untagged — Causes the port(s) to transmit frames without an IEEE
802.1Q header tag.
• forbidden — Instructs the device to ignore dynamic requests (either
through GVRP or dynamic egress) from the port(s) to join the VLAN
and disallows egress on that port.
• tagged — Causes the port(s) to transmit 802.1Q tagged frames.
vlan ‐ list Specifies the number of the VLAN from which a port(s) will be removed
from the egress list.
port ‐ string Specifies one or more ports to be removed from the VLAN egress list of the
specified vlan ‐ list . For a detailed description of possible port ‐ string values,
refer to “ Port String Syntax Used in the CLI ” on page 4 ‐ 1.