Enterasys G3G170-24, Cli Reference Manual

Page: 71 / 679

set console baud
Enterasys G-Series CLI Reference 2-27
set console baud
Use this command to set the console port baud rate.
Syntax
set console baud rate
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the console port baud rate to 19200:
G3(su)->set console baud 19200
Activating Licensed Features
In order to enable the G3 advanced features, such as Advanced Routing, you must purchase and
activate a license key. If you have purchased a license, you can proceed to activate your license as
described in this section. If you wish to obtain a permanent or evaluation license, use the
Enterasys Customer Portal or contact the Enterasys Networks Sales Department.
License Key Field Descriptions
When Enterasys supplies a license, it will be sent to you as a character string similar to the
following:
INCREMENT g3advrouter 2006.0127 27-jan-2011 0123456789AB 0123456789AB
The contents of the six fields, from the left, indicate:
• Type—the type of license. For the G ‐ Series, the value in this field is always “INCREMENT.”
• Feature—description of the feature being licensed. For example, ”g3advrouter”as shown in
the character string above.
• Date ‐ based version (DBV)—a date ‐ related string. For the G ‐ Series, the value in this field is not
significant.
• Expiration type—indicates whether the license is a permanent or an evaluation license. If the
license is an evaluation license, this field will contain the expiration date of the license. If the
license is a permanent license, this field will contain the word “permanent.”
• Key—the license key.
• Host ID—the serial number of the switch to which this license applies.
rate Sets the console baud rate. Valid values are: 300, 600, 1200, 2400, 4800, 5760,
9600, 14400, 19200, 38400, and 115200.