Enterasys G3G170-24, Cli Reference Manual

Page: 646 / 679

set vlanauthorization egress
20-44 Security Configuration
set vlanauthorization egress
Controls the modification of the current VLAN egress list of 802.1x authenticated ports for the
VLANs returned in the RADIUS authorization filter id string.
Syntax
set vlanauthorization egress { none | tagged | untagged } port-string
Parameters
Defaults
By default, administrative egress is set to untagged.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable the insertion of the RADIUS assigned VLAN to an 802.1q tag
for all outbound frames for ports 10 through 15 on unit/module number 3.
G3(rw)->set vlanauthorization egress tagged ge.3.10-15
clear vlanauthorization
Use this command to return port(s) to the default configuration of VLAN authorization disabled,
egress untagged.
Syntax
clear vlanauthorization [ port-string ]
Parameters
Defaults
If no port string is entered, all ports a will be reset to default configuration with VLAN
authorization disabled and egress frames untagged.
none Specifies that no egress manipulation will be made.
tagged Specifies that the authenticating port will be added to the current tagged
egress for the VLAN ‐ ID returned.
untagged Specifies that the authenticating port will be added to the current
untagged egress for the VLAN ‐ ID returned (default).
port ‐ string Specifies that the port or list of ports. to which this command will apply.
For a detailed description of possible port ‐ string values, refer to “ Port
String Syntax Used in the CLI ” on page 4 ‐ 1.
port ‐ string (Optional) Specifies which ports are to be restored to default
configuration. If no port string is entered, the action will be a global
setting. For a detailed description of possible port ‐ string values, refer to
“ Port String Syntax Used in the CLI ” on page 4 ‐ 1.