Enterasys G3G170-24, Cli Reference Manual

Page: 388 / 679

set rmon stats
12-4 RMON Configuration
Example
This example shows how to display RMON statistics for Gigabit Ethernet port 1 in switch 1.
:
G3(su)->show rmon stats ge.1.1
Port: ge.1.1
-------------------------------------
Index = 1
Owner = monitor
Data Source = ifIndex.1
Drop Events = 0 Packets = 0
Collisions = 0 Octets = 0
Jabbers = 0 0 - 64 Octets = 0
Broadcast Pkts = 0 65 - 127 Octets = 0
Multicast Pkts = 0 128 - 255 Octets = 0
CRC Errors = 0 256 - 511 Octets = 0
Undersize Pkts = 0 512 - 1023 Octets = 0
Oversize Pkts = 0 1024 - 1518 Octets = 0
Fragments = 0
Table 12 ‐ 2 provides an explanation of the command output.
set rmon stats
Use this command to configure an RMON statistics entry.
Syntax
set rmon stats index port-string [ owner ]
Parameters
Defaults
If owner is not specified, monitor will be applied.
Mode
Switch command, read ‐ write.
Example
This example shows how to configure RMON statistics entry 2 for ge .1.20:
G3(rw)->set rmon stats 2 ge.1.20
index Specifies an index for this statistics entry.
port ‐ string Specifies port(s) to which this entry will be assigned.
owner (Optional) Assigns an owner for this entry.