Enterasys G3G170-24, Cli Reference Manual

Page: 508 / 679

show ip pimsm interface
16-50 IPv4 Routing Protocol Configuration
Example
This example shows how to display PIM router information:
G3(su)->router> show ip pimsm componenttable
COMPONENT TABLE
Component Component Component Component
Index BSR Address BSR Expiry Time CRP Hold Time
(hh:mm:ss) (hh:mm:ss)
---------- --------------- --------------- -------------
1 192.168.30.2 00:02:10 00:00:00
Table 16 ‐ 8 provides an explanation of the command output.
show ip pimsm interface
This command displays PIM ‐ SM status of the router interfaces. With the stats parameter, this
command displays statistical information for PIM ‐ SM on the specified interface.
Syntax
show ip pimsm interface { vlan vlan-id | stats { vlan-id | all }}
Parameters
Defaults
None.
Mode
Any router mode .
Table 16-8 show ip pimsm componenettable Output Details
Output Field What it displays
Component Index This field displays a number which uniquely identifies the component.
Component BSR
Address This field displays the IP address of the bootstrap router (BSR) for the local PIM
region.
Component BSR
Expiry Time This field displays the minimum time remaining before the BSR in the local domain
will be declared down.
Component CRP
Hold Time This field displays the hold time of the component when it is a candidate rendezvous
point.
vlan vlan ‐ id Display PIM ‐ SM information for the specified IP interface enabled for
PIM.
stats Display PIM ‐ SM interface statistics.
vlan ‐ id | all Display statistics for a specific VLAN or all VLANs.