Enterasys G3G170-24, Cli Reference Manual

Page: 236 / 679

set spantree mstcfgid
6-16 Spanning Tree Configuration
G3(su)->show spantree mstcfgid
MST Configuration Identifier:
Format Selector: 0
Configuration Name: 00:01:f4:89:51:94
Revision Level: 0
Configuration Digest: ac:36:17:7f:50:28:3c:d4:b8:38:21:d8:ab:26:de:62
set spantree mstcfgid
Use this command to set the MST configuration name and/or revision level.
Syntax
set spantree mstcfgid { cfgname name | rev level }
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to set the MST configuration name to “mstconfig”:
G3(su)->set spantree mstconfigid cfgname mstconfig
clear spantree mstcfgid
Use this command to reset the MST revision level to a default value of 0, and the configuration
name to a default string representing the bridge MAC address.
Syntax
clear spantree mstcfgid
Parameters
None.
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset the MST configuration identifier elements to default values:
G3(su)->clear spantree mstcfgid
cfgname name Specifies an MST configuration name.
rev level Specifies an MST revision level. Valid values are 0 ‐ 65535 .