Enterasys G3G170-24, Cli Reference Manual

Page: 550 / 679

show ipv6 route summary
18-26 IPv6 Configuration
show ipv6 route summary
This command displays the summary of the routing table.
Syntax
show ipv6 route summary [ all ]
Parameters
Defaults
None.
Mode
Router privileged execution: G3(su) ‐ >router#
Router user execution: G3(su) ‐ >router>
Usage
Use the command without parameters to display the count summary for only the best routes. Use
all to display the count summary for all routes, including best and non ‐ best routes.
Example
This example illustrates the summary information displayed by this command.
G3(su)->router>show ipv6 route summary all
IPv6 Routing Table Summary - 6 entries
Connected Routes 3
Static Routes 3
OSPF Routes 0
Intra Area Routes 0
Inter Area Routes 0
External Type-1 Routes 0
External Type-2 Routes 0
Total routes 6
Number of Prefixes:
/0: 1, /64: 5
Table 18 ‐ 4 provides an explanation of the command output.
all (Optional) Display the count summary for all routes, including best and
non ‐ best routes.
Table 18-4 show ipv6 summary Output Details
Output Field What It Displays...
Connected Routes Total number of connected routes in the routing table.
Static Routes Total number of static routes in the routing table.
OSPF Routes Total number of routes installed by OSPFv3 protocol.
Number of Prefixes Summarizes the number of routes with prefixes of different lengths
Total Routes Total number of routes in the routing table.