Enterasys G3G170-24, Cli Reference Manual

Page: 328 / 679

show port priority
9-2 Port Priority Configuration
Commands
show port priority
Use this command to display the 802.1D priority for one or more ports.
Syntax
show port priority [ port-string ]
Parameters
Defaults
If port-string is not specified, priority for all ports will be displayed.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the port priority for the ge .2.1 through 5.
G3(su)->show port priority ge.2.1-5
ge.2.1 is set to 0
ge.2.2 is set to 0
ge.2.3 is set to 0
ge.2.4 is set to 0
ge.2.5 is set to 0
set port priority
Use this command to set the 802.1D (802.1p) Class ‐ of ‐ Service transmit priority (0 through 7) on
each port. A port receiving a frame without priority information in its tag header is assigned a
priority according to the priority setting on the port. For example, if the priority of a port is set to
5, the frames received through that port without a priority indicated in their tag header are
classified as a priority 5.
A frame with priority information in its tag header is transmitted according to that priority.
Syntax
set port priority port-string priority
For information about... Refer to page...
show port priority 9-4
set port priority 9-2
clear port priority 9-3
port ‐ string (Optional) Displays priority information for a specific port. For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax Used
in the CLI ” on page 4 ‐ 1.