Enterasys G3G170-24, Cli Reference Manual

Page: 61 / 679

set summertime
Enterasys G-Series CLI Reference 2-17
Example
This example shows how to display daylight savings time settings:
G3(su)->show summertime
Summertime is disabled and set to ''
Start : SUN APR 04 02:00:00 2004
End : SUN OCT 31 02:00:00 2004
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the first Sunday of April and ending at 2:00
of the last Sunday of October
set summertime
Use this command to enable or disable the daylight savings time function.
Syntax
set summertime { enable | disable} [ zone ]
Parameters
Defaults
If a zone name is not specified, none will be applied.
Mode
Switch command, read ‐ only.
Example
This example shows how to enable daylight savings time function:
G3(su)->set summertime enable
set summertime date
Use this command to configure specific dates to start and stop daylight savings time. These
settings will be non ‐ recurring and will have to be reset annually.
Syntax
set summertime date start_month start_date start_year start_hr_min end_month
end_date end_year end_hr_min [ offset_minutes ]
Parameters
enable | disable Enables or disables the daylight savings time function.
zone (Optional) Applies a name to the daylight savings time settings.
start_month Specifies the month of the year to start daylight savings time.
start_date Specifies the day of the month to start daylight savings time.
start_year Specifies the year to start daylight savings time.
start_hr_min Specifies the time of day to start daylight savings time. Format is hh:mm.
end_month Specifies the month of the year to end daylight savings time.