Enterasys G3G170-24, Cli Reference Manual

Page: 287 / 679

show vlan dynamicegress
Enterasys G-Series CLI Reference 7-15
Defaults
If forbidden is not specified, tagged and untagged settings will be cleared.
Mode
Switch command, read ‐ write.
Examples
This example shows how to remove ge .3.14 from the egress list of VLAN 9:
G3(su)->clear vlan egress 9 ge.3.14
This example shows how to remove all Gigabit Ethernet ports in slot 2 from the egress list of
VLAN 4:
G3(su)->clear vlan egress 4 ge.2.*
show vlan dynamicegress
Use this command to display the status of dynamic egress (enabled or disabled) for one or more
VLANs.
Syntax
show vlan dynamicegress [ vlan-list ]
Parameters
Defaults
If vlan ‐ list is not specified, the dynamic egress status for all VLANs will be displayed.
Mode
Switch command, read ‐ write.
Example
This example shows how to display the dynamic egress status for VLANs 50 ‐ 55:
G3(rw)->show vlan dynamicegress 50-55
VLAN 50 is disabled
VLAN 51 is disabled
VLAN 52 is disabled
VLAN 53 is enabled
VLAN 54 is enabled
VLAN 55 is enabled
forbidden (Optional) Clears the forbidden setting from the specified port(s) and resets
the port(s) as able to egress frames if so configured by either static or
dynamic means.
vlan ‐ list (Optional) Displays dynamic egress status for specific VLAN(s).