Enterasys G3G170-24, Cli Reference Manual

Page: 322 / 679

clear cos port-resource
8-26 Policy Classification Configuration
Example
This example displays the IRL resource index number 1 configuration for group 2.0.
G3(su)->show cos port-resource irl 2.0 1
'?' after the rate value indicates an invalid rate value
Group Index Resource Type Unit Rate Rate Limit Type Action
----------- -------- ---- ---- ---------- --------------- ------
2.0 1 irl kbps 10000 drop none
clear cos port-resource
Use this command to set the inbound rate limit in Kbps.
Syntax
clear cos port-resource irl { all | group-type-index [ irl-index [ unit ] [ rate ]
[ type ]]}
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example clears the data rate to 0 for IRL resource index 1 for group 2.0.
G3(su)->clear cos port-resource irl 2.0 1 rate
set cos reference
Use this command to set the Class of Service inbound rate limiting reference configuration.
irl Specifies that an IRL resource is to be cleared.
all Clear all IRL resources for all port groups.
group ‐ type ‐ index Specifies an inbound rate limiting port group/type index. Valid entries are
in the form of group#.port ‐ type .
Valid values for group# can range from 0 to 7. Valid values for port ‐ type
can range from 0 to 1, although only port type 0 is currently supported.
For example, port group 3 would be specified as 3.0 .
irl ‐ index (Optional) Inbound rate limiter resource index associated with the
specified port group. Valid values range from 0 to 99.
unit Clear the unit of measure for the inbound rate limiter.
rate Clear the data rate for this inbound rate limiter.
type Clear the action for the rate limiter.