Enterasys G3G170-24, Cli Reference Manual

Page: 313 / 679

set cos state
Enterasys G-Series CLI Reference 8-17
4. In the CoS settings table, configure a CoS setting for CoS index 1, which has a priority of 0. We
enter the IRL reference, created in the previous step.
G3(su)->set cos settings 0 irl-reference 1
G3(su)->show cos settings
CoS Index Priority ToS IRL
--------- ---------- ------- -----
0 0 * 1
1 1 * *
2 2 * *
3 3 * *
4 4 * *
5 5 * *
6 6 * *
7 7 * *
Commands
set cos state
Use this command to enable or disable Class of Service.
Syntax
set cos state { enable | disable }
For information about... Refer to page...
set cos state 8-17
show cos state 8-18
clear cos state 8-18
set cos settings 8-19
clear cos settings 8-20
show cos settings 8-21
set cos port-config 8-21
show cos port-config 8-22
clear cos port-config 8-23
set cos port-resource 8-24
show cos port-resource 8-25
clear cos port-resource 8-26
set cos reference 8-26
show cos reference 8-27
clear cos reference 8-28
show cos unit 8-29
clear cos all-entries 8-29
show cos port-type 8-30