Enterasys G3G170-24, Cli Reference Manual

Page: 130 / 679

clear lldp port location-info
3-30 Discovery Protocol Configuration
clear lldp port location-info
Use this command to return the port ECS ELIN location setting to the default value of null.
Syntax
clear lldp port location-info elin port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example returns the location information ELIN value on port ge .1.1 to the default value of
null.
G3(rw)->clear lldp port location-info elin ge.1.1
clear lldp port tx-tlv
Use this command to clear the optional LLDP and LLDP ‐ MED TLVs to be transmitted in
LLDPDUs by the specified port or ports to the default value of disabled.
Syntax
clear lldp port tx-tlv {[ all ] | [ port-desc ] [ sys-name ] [ sys-desc ] [ sys-cap ] [ mgmt-
addr ] [ vlan-id ] [ stp ] [ lacp ] [ gvrp ] [ mac-phy ] [ poe ] [ link-aggr ] [ max-frame ] [ med-
cap ] [ med-loc ] [ med-poe ]} port-string
Parameters
elin Specifies that the ECS ELIN location information value should be
cleared.
port ‐ string Specifies the port or range of ports to be affected.
all Disables all optional TLVs from being transmitted in LLDPDUs.
port ‐ desc Disables the Port Description optional basic LLDP TLV from being
transmitted in LLDPDUs.
sys ‐ name Disables the System Name optional basic LLDP TLV from being
transmitted in LLDPDUs.
sys ‐ desc Disables the System Description optional basic LLDP TLV from
being transmitted in LLDPDUs.
sys ‐ cap Disables the System Capabilities optional basic LLDP TLV from
being transmitted in LLDPDUs.
mgmt ‐ addr Disables the Management Address optional basic LLDP TLV from
being transmitted in LLDPDUs.