Enterasys G3G170-24, Cli Reference Manual

Page: 257 / 679

show spantree adminedge
Enterasys G-Series CLI Reference 6-37
Defaults
If sid is not specified, admin path cost will be reset for Spanning Tree 0.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset the admin path cost to 0 for ge .3.2 on SID 1:
G3(su)->clear spantree adminpathcost ge.3.2 sid 1
show spantree adminedge
Use this command to display the edge port administrative status for a port.
Syntax
show spantree adminedge [port port-string ]
Parameters
Defaults
If port ‐ string is not specified edge port administrative status will be displayed for all Spanning
Tree ports.
Mode
Switch command, read ‐ only.
Example
This example shows how to display the edge port status for ge .3.2:
G3(su)->show spantree adminedge port ge.3.2
Port ge.3.2 has a Port Admin Edge of Edge-Port
set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
Syntax
set spantree adminedge port-string {true | false}
Parameters
port ‐ string (Optional) Displays edge port administrative status for specific
port(s). For a detailed description of possible port ‐ string values,
refer to “ Port String Syntax Used in the CLI ” on page 4 ‐ 1.
port ‐ string Specifies the edge port. For a detailed description of possible port ‐ string
values, refer to “ Port String Syntax Used in the CLI ” on page 4 ‐ 1.
true | false Enables ( true ) or disables ( false ) the specified port as a Spanning Tree edge
port.