Enterasys G3G170-24, Cli Reference Manual

Page: 140 / 679

set port enable
4-8 Port Configuration
Mode
Switch command, read ‐ write.
Example
This example shows how to disable ge .1.1:
G3(su)->set port disable ge.1.1
set port enable
Use this command to administratively enable one or more ports.
Syntax
set port enable port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to enable ge .1.3:
G3(su)->set port enable ge.1.3
show port alias
Use this command to display the alias name for one or more ports.
Syntax
show port alias [ port-string ]
Parameters
Defaults
If port ‐ string is not specified, aliases for all ports will be displayed.
Mode
Switch command, read ‐ only.
port ‐ string Specifies the port(s) to enable. For a detailed description of possible port ‐
string values, refer to “ Port String Syntax Used in the CLI ” on page 4 ‐ 1.
port ‐ string (Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port ‐ string values, refer to “ Port String Syntax
Used in the CLI ” on page 4 ‐ 1.