Enterasys G3G170-24, Cli Reference Manual

Page: 125 / 679

set lldp port med-trap
Enterasys G-Series CLI Reference 3-25
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example enables transmitting LLDP traps on ports ge .1.1 through ge .1.6.
G3(rw)->set lldp port trap enable ge.1.1-6
set lldp port med-trap
Use this command to enable or disable sending an LLDP ‐ MED notification when a change in the
topology has been sensed on the port (that is, a remote endpoint device has been attached or
removed from the port).
Syntax
set lldp port med-trap { enable | disable } port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example enables transmitting LLDP ‐ MED traps on ports ge .1.1 through ge .1.6.
G3(rw)->set lldp port med-trap enable ge.1.1-6
set lldp port location-info
Use this command to configure LLDP ‐ MED location information on a port or range of ports.
Currently, only Emergency Call Services (ECS) Emergency Location Identification Number
(ELIN) is supported.
Syntax
set lldp port location-info elin elin-string port-string
enable Enables transmitting LLDP ‐ MED traps on the specified ports.
disable Disables transmitting LLDP ‐ MED traps on the specified ports.
port ‐ string Specifies the port or range of ports to be affected.