Enterasys G3G170-24, Cli Reference Manual

Page: 66 / 679

set system name
2-22 Basic Configuration
Mode
Switch command, read ‐ only.
Example
This example shows how to display version information. Please note that you may see different
information displayed, depending on the type of hardware.
G3(su)->show version
Copyright (c) 2007 by Enterasys Networks, Inc.
Boot promt:01.00.38
Slot Port
Model Serial Number Hw Version FW Version BuFw Version
---- --- ---- ------------- ----------- ---------- --------------
0 24 G3G170-24 000011223301 BCM56514 REV 101.00.00.0012T 01.00.00.0011T
Table 2 ‐ 5 provides an explanation of the command output.
set system name
Use this command to configure a name for the system.
Syntax
set system name [ string ]
Parameters
Defaults
If string is not specified, the system name will be cleared.
Mode
Switch command, read ‐ write.
Table 2-5 show version Output Details
Output Field What It Displays...
Slot Module slot number (if applicable)
Port Number of ports supported.
Model Switch’s model number.
Serial # Serial number of the switch.
Versions • Hw: Hardware version number.
• Bp: BootPROM version.
• Fw: Current firmware version number.
• BuFw: Backup firmware version number.
• PoE: Power over Ethernet driver version. (Displays only for PoE switches.)
string (Optional) Specifies a text string that identifies the system.
Note: A name string containing a space in the text must be enclosed in
quotes as shown in the example below.