Enterasys G3G170-24, Cli Reference Manual

Page: 329 / 679

clear port priority
Enterasys G-Series CLI Reference 9-3
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Usage
The set port priority command will not change the 802.1p priority tag on tagged traffic with a
default priority tag. The command only has an effect on how untagged traffic will be prioritized
as it passes internally through the device.
Example
This example shows how to set a default priority of 6 on ge .1.3. Frames received by this port
without priority information in their frame header are set to the default setting of 6:
G3(su)->set port priority ge.1.3 6
clear port priority
Use this command to reset the current CoS port priority setting to 0. This will cause all frames
received without a priority value in its header to be set to priority 0.
Syntax
clear port priority port-string
Parameters
Defaults
None.
Mode
Switch command, read ‐ write.
Example
This example shows how to reset ge .1.11 to the default priority:
G3(rw)->clear port priority ge.1.11
port ‐ string Specifies the port for which to set priority. For a detailed description of
possible port ‐ string values, refer to “ Port String Syntax Used in the CLI ” on
page 4 ‐ 1.
priority Specifies a value of 0 to 7 to set the CoS priority for the port entered in the
port ‐ string . Priority value of 0 is the lowest priority.
port ‐ string Specifies the port for which to clear priority. For a detailed description of
possible port ‐ string values, refer to “ Port String Syntax Used in the CLI ” on
page 4 ‐ 1.